Hetzner - DokuWiki
Root Server Hardware/en
Arno (Diskussion | Beiträge) |
Arno (Diskussion | Beiträge) |
||
| (Eine dazwischenliegende Version von einem Benutzer wird nicht angezeigt) | |||
| Zeile 306: | Zeile 306: | ||
|} | |} | ||
| − | <big>*</big>Valid for orders from 29/05/2019.<br/><big>**</big> inclusive monthly traffic for servers 10G uplink is 20TB. There is no bandwidth limitation. Overusage will be charged with € 1/TB.<br/><big>***</big> | + | <big>*</big>Valid for orders from 29/05/2019.<br/><big>**</big> inclusive monthly traffic for servers 10G uplink is 20TB. There is no bandwidth limitation. Overusage will be charged with € 1/TB.<br/><big>***</big> We offer a management service. This service costs € 211.76/month per switch. If you decide to take this servers, then you won't get any access to the switches. We will configure the the switches for you and monitor its availability. You can contact our network deprartment any time if you wish to change the settings on the switch and we charge € 17.65 per 15 minutes of work. Also we will keep a replacement of the exactly the same switch with exactly the same configuration and in case the switch fails we will replace it for free. If you don't want to use that management service, then you also can get access to the switch. But you need to have good knowledge of how to administrate a Juniper switch properly. We won't offer any support then and we also cannot guarantee that we always have enough spare parts on stock. |
| − | We | + | |
| − | If you don't want to use that management service, then you also can get access to the switch. But you need to have good knowledge of how to administrate a Juniper switch | + | |
[[Payment FAQ/en#How much VAT do I need to pay.3F|Prices plus VAT, if applicable.]] | [[Payment FAQ/en#How much VAT do I need to pay.3F|Prices plus VAT, if applicable.]] | ||
Version vom 8. Oktober 2019, 11:23 Uhr
Inhaltsverzeichnis |
Hardware Upgrades
For some of our dedicated servers we offer hardware upgrades. For any questions please send a support request via the Robot to our product advice department.
Drives
In most cases we can install up to 4 drives in our AX50-SSD, AX60-SSD, EX-and PX-servers (and in the auction servers), meaning we can either add 2 additional drives or we can remove the default drives and install 4 new drives.
For Dell Servers DX152/DX292 we can install up to 8xNVMe SSDs or 10xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. Maximum are 10 disks.
For Dell Server DX180 we can install up to 10xNVMe SSDs or 8xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. Maximum are 10 disks.
For AX100 the following combinations are possible: NVMe SSDs and SATA SSDs (up to 6x NVMe SSDs, up to 8x SATA SSDs, but maximum 8 disks in total) or 3x NVMe SSDs or SATA SSDs + 1x SATA HDD; 2x NVMe SSDs or SATA SSDs + 2x SATA HDDs; 3x SATA HDDs.
For AX160-Servers we can install up to 7xNVMe SSDs or 8xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. Maximum are 8 disks.
For PX62-NVMe the following combinations are possible: NVMe SSDs and SATA SSDs (up to 2x NVMe SSDs, up to 6x SATA SSDs, but maximum 8 disks in total); 1x NVMe SSD or 1xSATA SSD + 1x SATA HDD; 2x SATA HDDs.
For PX92 the following combinations are possible: NVMe SSDs and SATA SSDs (up to 4x NVMe SSDs, up to 6x SATA SSDs, but maximum 8 disks in total) or 3x NVMe SSDs or SATA SSDs + 1x SATA HDD; 2x NVMe SSDs or SATA SSDs + 2x SATA HDDs; 3x SATA HDDs.
To order additional drives for your server please send a verified support request via the Robot directly to our technicians, making sure to select the server in question and confirming both the costs of the drives and a time when the installation can take place.
A list of drives we offer and their prices can be found in the following table:
| Drives | Price* per month | Comment |
|---|---|---|
| 2 TB SATA Enterprise Hard Drive | € 10.00 | not available for DX152/292/180 and AX160-servers |
| 4 TB SATA Enterprise Hard Drive | € 13.00 | not available for DX152/292/180 and AX160-servers |
| 6 TB SATA Enterprise Hard Drive | € 14.50 | not available for DX- and AX160-servers |
| 8 TB SATA Enterprise Hard Drive | € 18.00 | not available for DX- and AX160-servers |
| 10 TB SATA Enterprise Hard Drive | € 19.50 | not available for DX152/292/180 and AX160-servers |
| 12 TB SATA Enterprise Hard Drive | € 26.50 | not available for DX- and AX160-servers |
| 600 GB SAS Enterprise Hard Drive | € 17.50 |
only for DX141/150/151/290/291 |
| 240 GB SATA SSD | € 4.00 |
not available for DX-line |
| 500 GB SATA SSD | € 6.00 |
not available for DX-line |
| 1 TB SATA SSD | € 10.50 |
not available for DX-line |
| 240 GB SATA SSD Datacenter Edition | € 5.00 |
|
| 480 GB SATA SSD Datacenter Edition | € 7.00 |
|
| 960 GB SATA SSD Datacenter Edition | € 11.50 |
|
| 1.92 TB SATA SSD Datacenter Edition | € 22.00 |
|
| 3.84 TB SATA SSD Datacenter Edition | € 38.00 |
|
| 512 GB NVMe SSD | € 7.50 |
Only for following servers: EX62 EX61 EX52 EX42 EX41/41S/51 (incl. SSD types) PX61 (incl. SSD types) PX62 AX60-SSD Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 1 TB NVMe SSD | € 12.00 |
Only for following servers: EX62 EX61 EX52 EX42 EX41/41S/51 (incl. SSD types) PX61 (incl. SSD types) PX62 AX60-SSD Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 960 GB NVMe SSD Datacenter Edition | € 19.00 |
Only for following servers: EX62 EX61 EX52 EX42 EX41/41S/51 (incl. SSD types) EX51-SSD-GPU PX61 (incl. SSD types) PX62 AX60-SSD SX132 Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 1.92 TB NVMe SSD Datacenter Edition | € 36.00 |
Only for following servers: EX62 EX61 EX52 EX42 EX41/41S/51 (incl. SSD types) EX51-SSD-GPU PX61 (incl. SSD types) PX62 AX60-SSD SX132 Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 3.84 TB NVMe SSD Datacenter Edition (currently out of stock) |
€ 57.00 |
Only for following servers: EX62 EX61 EX52 EX42 EX41/41S/51 (incl. SSD types) EX51-SSD-GPU PX61 (incl. SSD types) PX62 AX60-SSD SX132 Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 480GB NVMe SSD 3D XPoint** | € 43.00 |
Only for following servers: EX62 EX61 EX52 EX42 EX41/41S/51 (incl. SSD types) EX51-SSD-GPU PX61(incl. SSD types) PX62 AX60-SSD SX132 Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
*Valid for orders from 07/08/2019.
**3D XPoint is the latest non-volatile, solid-state storage technology, which greatly improves performance and endurance when compared to regular NAND flash. For example, 3D XPoint can be combined with a Linux kernel 4.11+ and serve as a swap device to provide additional cost-effective system memory with low latency or it can be used as an even faster caching solution.
RAM
A number of our EX and PX servers can be upgraded with more RAM. These upgrades only involve the amount of RAM in the server being increased. No other changes are made to the server. The installation of the additional RAM usually takes 20-30 minutes, during which the server must be turned off.
To order a RAM upgrade for your server please send a verified support request via the Robot directly to our technicians, making sure to select the server in question and confirming both the costs of the upgrade and a time when the installation can take place.
The following table list all of the RAM upgrades we offer for our servers.
| Server | RAM Upgrade | Setup Fee | Additional Monthly Fee | Comment |
|---|---|---|---|---|
| EX41-SSD |
32 -> 64 GB |
€ 99.00 | € 10.00 | |
| SX60, EX4, EX6, EX8 |
16 -> 32 GB | € 17.65 (Remote Hands) | € 8.40 | |
| SX131, PX90, PX90-SSD |
64 -> 128 GB | € 108.40 | € 25.21 | |
| PX91, PX91-SSD |
64 → 128 GB | 83.19 € | 0.00 € | |
| |
128 → 256 GB | 108.40 € | 25.21 € | |
| SX132 |
128 -> 256 GB | € 0.00 | € 48.00 |
|
| PX92 |
per 32GB DDR4 step |
€ 0.00 | € 12.00 |
4 steps maximum |
| |
per 64GB DDR4 step (only on request, about 4 weeks delivery time) |
€ 0.00 | € 34.00 |
5 steps minimum, 8 steps maximum |
| AX160-line |
per 32GB DDR4 step |
€ 0.00 | € 12.00 |
12 steps maximum |
| |
per 64GB DDR4 step (only on request, about 4 weeks delivery time) |
€ 0.00 | € 34.00 |
9 steps minimum, 16 steps maximum |
| DX150/290 | per 32GB DDR3 step |
€ 0.00 | € 11.00 |
4/8 steps maximum |
| DX141/151/291 |
per 32GB DDR4 step |
€ 0.00 | € 12.00 |
6/10/20 steps maximum |
| DX152/292/DX180 |
per 32GB DDR4 step |
€ 0.00 | € 12.00 |
22/22/12 steps maximum |
Miscellaneous
The following table lists miscellaneous hardware we can install in some of our servers.
| Component | Price* per month | Comment |
|---|---|---|
| 1G NIC (Intel) (NOT available for DX-servers) | € 2.00 | not supported from Windows Server 2016 |
| DUAL 1G NIC (Intel i350) (for DX-servers only) | € 5.00 |
|
| LAN connection 1G |
€ 1.00 | |
| 10G NIC (NOT available for DX-servers) |
€ 8.00 |
|
| Dual 10G NIC (NOT available for DX-servers) |
€ 12.00 |
|
| Dual 10G NIC (for DX-servers only) |
€ 15.50 |
|
| LAN connection 10G |
€ 2.50 | |
| 4-Port Hardware RAID-controller (NOT available for AX160) |
€ 21.00 | |
| BBU for RAID controller | € 12.50 | |
| 5-Port 1 Gbit switch |
€ 2.00 | |
| 8-Port 1 Gbit switch |
€ 2.00 | |
| 24-Port 1 Gbit switch |
€ 13.00 | |
| 48-Port 1 Gbit switch *** |
€ 135.50 |
|
| 12-Port 10 Gbit switch | € 43.00 | |
| 48-Port 10 Gbit switch *** | € 332.00 |
|
| 96-Port 10 Gbit switch *** | € 529.00 |
|
| 10G dedicated uplink (incl. 10G NIC)** | € 39.00 | Only available for DX-line (only at location NBG1), PX-line, AX60-SSD, AX160-NVMe/-SSD, SX62/132/292 and EX-line (only at location FSN1 and HEL1). Firewall- and vswitch-feature is not available. |
| 16 GB USB stick | € 1.50 | |
| 64 GB USB stick | € 3.50 | |
| HDMI emulator for EX51-SSD-GPU | € 1.00 | |
*Valid for orders from 29/05/2019.
** inclusive monthly traffic for servers 10G uplink is 20TB. There is no bandwidth limitation. Overusage will be charged with € 1/TB.
*** We offer a management service. This service costs € 211.76/month per switch. If you decide to take this servers, then you won't get any access to the switches. We will configure the the switches for you and monitor its availability. You can contact our network deprartment any time if you wish to change the settings on the switch and we charge € 17.65 per 15 minutes of work. Also we will keep a replacement of the exactly the same switch with exactly the same configuration and in case the switch fails we will replace it for free. If you don't want to use that management service, then you also can get access to the switch. But you need to have good knowledge of how to administrate a Juniper switch properly. We won't offer any support then and we also cannot guarantee that we always have enough spare parts on stock.
Prices plus VAT, if applicable.
Hardware Configuration
VQ Servers
VQ7
- Single Core
- 512 MB RAM
- 20 GB HDD
VQ12
- Single Core
- 1024 MB RAM
- 40 GB HDD
VQ19
- Single Core
- 2048 MB RAM
- 80 GB HDD
VX Servers
VX6
- Single Core
- 1 GB RAM
- 25 GB HDD
VX11
- Dual Core
- 2 GB RAM
- 50 GB HDD
VX18
- Dual Core
- 4 GB RAM
- 100 GB HDD
CX Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| CX10 | 1 vCore | 1 GB | 25 GB |
| CX20 | 2 vCores | 2 GB | 50 GB |
| CX30 | 2 vCores | 4 GB | 100 GB |
| CX40 | 2 vCores | 8 GB | 200 GB |
| CX50 | 4 vCores | 16 GB | 400 GB |
| CX60 | 8 vCores | 32 GB | 600 GB |
DS Servers
DS 3000
- AMD Athlon 64 X2 5600+ Dual Core
- 2 GB DDR2 RAM
- 2x 400 GB SATA II HDD
DS 5000
- AMD Athlon 64 X2 5600+ Dual Core
- 4 GB DDR2 RAM
- 2x 400 GB SATA II HDD
DS 7000
- AMD Athlon 64 X2 6000+ Dual Core
- 6 GB DDR2 RAM
- 2x 750 GB SATA II HDD
DS 8000
- AMD Athlon 64 X2 6000+ Dual Core
- 8 GB DDR2 RAM
- 2x 750 GB SATA II HDD
EQ Servers
EQ 4
- Intel Core i7-920 Quad Core
- 8 GB DDR3 RAM
- 2x 750 GB SATA II HDD
EQ 6
- Intel Core i7-920 Quad Core
- 12 GB DDR3 RAM
- 2x 1500 GB SATA II HDD
EQ 8
- Intel Core i7-920 Quad Core
- 24 GB DDR3 RAM
- 2x 1500 GB SATA II HDD
EQ 9
- Intel Core i7-975 Quad Core
- 12 GB DDR3 RAM
- 3x 1500 GB SATA II HDD
EQ 10
- Intel Core i7-980X Hexa Core
- 24 GB DDR3 RAM
- Individual drive configuration
X Servers
X2
- AMD Athlon 64 3700+
- 1 GB DDR RAM
- 2x 160 GB SATA II HDD
X3
- AMD Athlon 64 X2 4200+ Dual Core
- 2 GB DDR RAM
- 2x 300 GB SATA II HDD
X4
- AMD Athlon 64 X2 5600+ Dual Core
- 4 GB DDR2 RAM
- 2x 400 GB SATA II HDD
X5
- AMD Athlon 64 X2 6000+ Dual Core
- 8 GB DDR2 RAM
- 2x 750 GB SATA II HDD
AX Servers
AX10
- Samsung Exynos-5422 Octa Core
- 2 GB LPDDR3
- 32 GB MicroSD
AX20
- Samsung Exynos-5422 Octa Core
- 2 GB LPDDR3
- 64 GB eMMC
AX30
- Samsung Exynos-5422 Octa Core
- 2 GB LPDDR3
- 32 GB MicroSD + 3 TB HDD (USB3)
EX Servers
See: https://www.hetzner.de/en/hosting/produktmatrix/rootserver-produktmatrix-ex
EX4
- Intel Core i7-2600 Quad Core
- 16 GB DDR3 RAM
- 2x 3 TB SATA III HDD
EX4S
- Intel Core i7-2600 Quad Core
- 32 GB DDR3 RAM
- 2x 3 TB SATA III HDD
EX5
- Intel Core i7-920 Quad Core
- 24 GB DDR3 RAM
- 2x 750 GB SATA II HDD
EX6
- Intel Xeon E3-1245 Quad Core
- 16 GB DDR3 ECC RAM
- 2x 3 TB SATA III Enterprise HDD
EX6S
- Intel Xeon E3-1245 Quad Core
- 32 GB DDR3 ECC RAM
- 2x 3 TB SATA III Enterprise HDD
EX8
- Intel Xeon E3-1275 Quad Core
- 16 GB DDR3 ECC RAM
- Individual drive configuration
EX8S
- Intel Xeon E3-1275 Quad Core
- 32 GB DDR3 ECC RAM
- Individual drive configuration
EX10
- Intel Core i7-3930K Hexa Core
- 64 GB DDR3 RAM
- 2x 3 TB SATA III HDD
EX40
- Intel Core i7-4770 Quad Core
- 32 GB DDR3 RAM
- 2x 2 TB SATA III Enterprise HDD
EX40-SSD
- Intel Core i7-4770 Quad Core
- 32 GB DDR3 RAM
- 2x 240 GB SATA III SSD
EX60
- Intel Core i7-920/930/950 Quad Core
- 48 GB DDR3 RAM
- 2x 2 TB SATA II Enterprise HDD
EX41
- Intel Core i7-6700 Quad Core
- 32 GB DDR4
- 2× 4 TB SATA3, Enterprise
EX41-SSD
- Intel Core i7-6700 Quad Core
- 32 GB DDR4
- 2× 500 GB SSD
EX41S
- Intel Core i7-6700 Quad Core
- 64 GB DDR4
- 2× 2 TB SATA3, Enterprise
EX41S-SSD
- Intel Core i7-6700 Quad Core
- 64 GB DDR4
- 2× 250 GB SSD
EX51
- Intel Core i7-6700 Quad Core
- 64 GB DDR4
- 2× 4 TB SATA3, Enterprise
EX51-SSD
- Intel Core i7-6700 Quad Core
- 64 GB DDR4
- 2× 500 GB SSD
EX61
- Intel Core i7-8700 Hexa Core
- 64 GB DDR4
- 2× 6 TB SATA3, Enterprise
EX61-NVMe
- Intel Core i7-8700 Hexa Core
- 64 GB DDR4
- 2× 512 GB NVMe SSD
XS Servers
XS13
- Intel Core i7-920 Quad Core
- 12 GB DDR3 RAM
- 7x 3 TB SATA II HDD
XS29
- Intel Xeon E3-1245 Quad Core
- 32 GB DDR3 ECC RAM
- 15x 3 TB SATA III HDD
- 16-Port Hardware RAID-Controller
PX Servers
See: https://www.hetzner.de/en/hosting/produktmatrix/rootserver-produktmatrix-px
PX60
- Intel Xeon E3-1270 v3 Quad Core
- 32 GB DDR3 ECC RAM
- 2x 2 TB SATA III Enterprise HDD
PX60-SSD
- Intel Xeon E3-1270 v3 Quad Core
- 32 GB DDR3 ECC RAM
- 2x 240 GB SATA III Data Center Series SSD
PX70
- Intel Xeon E3-1270 v3 Quad Core
- 32 GB DDR3 ECC RAM
- 2x 4 TB SATA III Enterprise HDD
PX70-SSD
- Intel Xeon E3-1270 v3 Quad Core
- 32 GB DDR3 ECC RAM
- 2x 480 GB SATA III Data Center Series SSD
PX80
- AMD Opteron 6338P 12 Core
- 64 GB DDR3 ECC RAM
- 2x 2 TB SATA III Enterprise HDD
PX90
- Intel Xeon E5-1650 v2 Hexa Core
- 64 GB DDR3 ECC RAM
- 2x 2 TB SATA III Enterprise HDD
PX90-SSD
- Intel Xeon E5-1650 v2 Hexa Core
- 64 GB DDR3 ECC RAM
- 2x 240 GB SATA III Data Center Series SSD
PX120
- Intel Xeon E5-1650 v2 Hexa Core
- 128 GB DDR3 ECC RAM
- 2x 2 TB SATA III Enterprise HDD
PX120-SSD
- Intel Xeon E5-1650 v2 Hexa Core
- 128 GB DDR3 ECC RAM
- 2x 240 GB SATA III Data Center Series SSD
PX91
- Intel Xeon E5-1650 v3 Hexa Core
- 128 GB DDR4 ECC
- 2× 2 TB SATA3, Enterprise
PX91-SSD
- Intel Xeon E5-1650 v3 Hexa Core
- 128 GB DDR4 ECC
- 2× 240 GB SATA3 Data Center Series SSD
PX121
- Intel Xeon E5-1650 v3 Hexa Core
- 256 GB DDR4 ECC
- 2× 4 TB SATA3, Enterprise
PX121-SSD
- Intel Xeon E5-1650 v3 Hexa Core
- 256 GB DDR4 ECC
- 2× 480 GB SATA3 Data Center Series SSD
PX61
- Intel Xeon E3-1275 v5 Quad Core
- 64 GB DDR4 ECC
- 2× 4 TB SATA3 HDD, Enterprise
PX61-SSD
- Intel Xeon E3-1275 v5 Quad Core
- 64 GB DDR4 ECC
- 2× 480 GB SATA SSD Data Center Series
PX61-NVMe
- Intel Xeon E3-1275 v5 Quad Core
- 64 GB DDR4 ECC
- 2× 512 GB NVMe SSD
SX-Server
| Name | CPU | RAM | Disk |
|---|---|---|---|
| SX60 | Intel Core i7-2600 Quad Core | 16 GB DDR3 | 4× 4 TB SATA3, 24/7 certified |
| SX130 | Intel Core i7-3770 Quad Core | 32 GB DDR3 | 7× 4 TB SATA3, 24/7 certified |
| SX290 | Intel Xeon E3-1245 Quad Core | 32 GB DDR3 ECC | 15× 4 TB SATA3, 24/7 certified |
| SX61 | Intel i7-3770 Quad Core | 32 GB DDR3 | 4× 6 TB SATA3, Enterprise, HW RAID |
| SX131 | Intel Xeon E5-1650 v2 Hexa Core | 64 GB DDR3 ECC | 10× 6 TB SATA3, Enterprise |
| SX291 | Intel Xeon E5-1650 v2 Hexa Core | 128 GB DDR3 ECC | 15× 6 TB SATA3, Enterprise, HW RAID |
See: https://www.hetzner.de/en/hosting/produktmatrix/rootserver-produktmatrix-sx
DX Servers
See: https://www.hetzner.de/en/hosting/produktmatrix/dell
| Name | CPU | RAM | Disk |
|---|---|---|---|
| DX150 | Intel Xeon E5-2620 Hexa Core | 64 GB DDR3 ECC | individual configuration for disks |
| DX290 | 2× Intel Xeon E5-2620 Hexa Core | 128 GB DDR3 ECC | individual configuration for disks |
| DX141 |
Intel Xeon E5-1650 v3 Hexa Core |
64 GB DDR4 ECC |
individual configuration for disks |
| DX151 |
Intel Xeon E5-2600 v3 Octa Core |
64 GB DDR4 ECC |
individual configuration for disks |
| DX291 |
2× Intel Xeon E5-2600 v3 Octa Core |
128 GB DDR4 ECC | individual configuration for disks |
