Hetzner - DokuWiki

EQ4, EQ6, EQ9

Angaben ohne Gewähr

/etc/sensors3.conf von Debian / lm-sensors 3.0.2
================================================

#
# sample configuration for the Fintek f71882fg for MSI X58 Pro (7522-040R,
# like seen in Hetzner's EQ6 servers). To load the driver module, append a
# single line (without the #) to /etc/modules:
# f71882fg
#
chip "f71882fg-*"

# never change the in0, in7 and in8 compute, these are hardwired in the chip!
  compute in0       (@ * 2), (@ / 2)
  compute in2       (@ * 2), (@ / 2)
  compute in3       (@ * 2), (@ / 2)
  compute in4       (@ * 5.25), (@ / 5.25)
  compute in5       (@ * 11), (@ / 11)
  compute in6       (@ * 5.25), (@ / 5.25)
  compute in7       (@ * 2), (@ / 2)
  compute in8       (@ * 2), (@ / 2)

# Temperature
  # cpu temp is about 35 deg celsius (linux, idle)
  label temp1       "CPU"
  set temp1_max 70
  set temp1_crit 80
  # the IOH runs rather hot, even with an idle system 60..65 deg celsius
  # are seen. DO NOT ACTIVATE CPU SMART FAN OR IT WILL GET EVEN HOTTER!
  label temp2       "IOH"
  set temp2_max 80
  set temp2_crit 90
  # system is about 40 deg celsius (linux, idle)
  label temp3       "System"
  set temp3_max 50
  set temp3_crit 55

# Fans
  # value (CPU smart fan disabled!) is about 2300 rpm (linux, idle)
  label fan1        "CPU"
  ignore fan2
  # value is about 2200 rpm (linux, idle)
  label fan3        "System2"
  ignore fan4

# Voltage
  label in0         "3.3V"
  label in1         "Vcore"
  # BIOS (loaded) in1 == 1.25V
  # linux idle in1 == 1.05V (?)
  set in1_max 1.35
  ignore in2
  ignore in3
  label in4         "+5V"
  label in5         "12V"
  ignore in6
  label in7         "3VSB"
  label in8         "Battery"